Home > News

What are the Three Advantages of Magnesium Alloy Die Casting Mold Temperature Machine?

Jun. 04, 2020
Share:

Perhaps we all know the electroplating process of die castings, but many people can’t tell where it is used. In fact, electroplating surface treatment products range from jewelry accessories to cars and subways, and many things use electroplating. Electroplating has a great protective effect on the products. Die Casting Parts Supplier does not exaggerate that if there is no electroplating, 80% or 90% of the die casting metal products on the earth will soon become rusty and broken. 

Magnesium Alloy Die Cast Part

Magnesium Alloy Die Cast Part

When electroplating die-casting parts, it is required that the plating layer and the product itself has excellent binding force, but we all know that the surface of the die-casting part has an extremely fine oxide film, even if this oxide film is removed, it will be very short New products were quickly produced within a period of time. This layer of film severely blocked the combination of the coating and aluminum.

Three advantages of Magnesium Alloy Die Cast Part mold temperature machine:

1. The heating speed is fast, the heat transfer efficiency is high, and it is not easy to scale. It can be used to quantify heating oil and how much heating is required. The oil has no local high temperature and carbonization, thus ensuring the quality of the oil and the heat transfer efficiency of the heater.

2. The die-casting mold temperature machine adopts imported plate heat exchanger to make the unit compact and increase the temperature can be accelerated. Pipeline explosion-proof device, air blowing and air returning function. Oil return temperature display, automatic exhaust function at startup and heating power switching function.

3. Use computer touch control to make it clearer, convenient and easy to operate. The tube is made of one-piece stainless steel forming technology to make it more uniform. The unit protection function has been strengthened, and the safety and fault indication system has been improved. You need to pay special attention to furnace production. If done well, aluminum losses can be minimized. The temperature of the heater must also be controlled. In the production process, we must ensure that its temperature is guaranteed, and strive to reduce its temperature to a suitable range. The thing we must pay attention to is that after the production is completed, we may waste part of the garbage. In addition, it is necessary to ensure that each process is very accurate, and aluminum alloy die castings must be concentrated in the production process. The most important thing is to pay attention to the ventilation and dryness of storage.

Our company also has Aluminum Alloy Die Cast Part for sale, please contact us.